Calibrators

Volt / mA Calibrator is a source and measurement tool. This calibrator is use to measure or output 0 to 24 mA DC Current loop, & 0 to 20V DC Voltage. But the calibrator cannot be used to measurement and source simultaneously.

General Specifications :
• DC Voltage input and output : 0-100.00mV / 20.000V± (0.02% + 3)
• DC Current input and output : 24.000mA ± (0.015% + 3)
• Loop Power output : 24V ± 10%
• Input impedance : 2Megohm.
• Over Voltage protection : 30V
• Voltage driver capability : 1mA
• 5 digit LCD dual display
• LCD size : 64 x 42mm
• Operating Temperature : -10°C ~ 55°C
• Storage Temperature : -40°C ~ 60°C
• Operating altitude : 3000 meters maximum
• Temperature Coefficient : ± 0.005% of range per °C for the
  temperature range -10°C to 18°C & 28°C to 55°C
• Relative Humidity : 95% upto 30°C, 75% upto 40°C,
  45% upto 50°C, 35% upto 55°C.
• Shock : Random 2g, 5Hz to 500Hz
• Fuse : 125mA / 250V fast acting fuse
• Power Supply : 1.5V AAA x 6 batteries.
• External power optional
• Dimension : 204(L) x 99(W) x 46(H)mm
• Weight : Approx. 460g. (including battery)

This multifunction Process Calibrator has high accuracy of ± 0.02%. It has 5 digits dual display, Volts, RTD & Thermocouples and it works on 4 x1.5AAA alkaline battery. Output range up to 500W about 1mA and 5kW about 1. 1mA exciting current (for RTD calibration) and output for calibrating R, S, K, E, J, T, N, B type Thermocouple. It also give RTD, PT -100 & Cu 50

General Specifications :
• Accuracy : ± 0.02%
• Display : LCD double displaying : 68.0 x36.3mm
• Backlight : White LED backlight, can set Back light ON Time 0-9000 S
• Operating Temperature and Humidity : 0 - 50 ºC , ≤ 80% RH ; 70% RH < 40 - 50 ºC
• Altitude : ≤ 2000m
• Storage Temperature and Humidity : -25 to 60ºC, ≤90% RH
• Vibration Test : Randomly 2g, 5 ~ 500Hz
• Warm-up time : Testing under one meter boot- strap warm-up time is 10 minutes
• Power supply : 4 X 1.5V AAA alkaline battery
• Dimension : 205 x 95 x 42 mm
• Weight : About 500g

This Calibrator is a source for Volts, Ohms RTD & Thermocouples. It gives output of Volts in 2 ranges 100mV & 1000mV & also gives output of Ohms in 2 ranges 400W & 4000W & output for calibrating R, S, B, E, K, J, T & N type Thermocouples. It also gives output for RTD Pt1000 & Cu50. It has very high accuracy 0.05%.

General Specification :
• Basic Accuracy : ± 0.05%
• Display : 5 Digit LCD display.
• Max. Allowable Voltage : 30V..
• Operating Temperature Range : 0 ~ 50°C.
• Humidity range : ≤ 80% RH
• Storage Temperature Range :≤ -10°C ~ 55°C
• Humidity range : ≤ 90% RH
• Temperature Coefficient : 0.1 x (dedicated Accuracy) % /
  °C (5°C ~ 18°C, 28°C ~ 40°C)
• Power : 1.5V x 2 alkaline batteries.
• Power Consumption : about 60m / 3V.
• Dimension : 180 (L) x 90 (W) x 47 (D) mm (with protector)
• Weight : About 500g

• Delivery Time: Ready Stock, subject to prior sales

Model KM-CAL-710
Thermocouple Process Calibrator is a exactitude measurement and source handhold instrument, it can be use to calibrate the Thermocouple instrument. Thermocouple Process Calibrator can measure or simulate 8 types of difference Thermocouple (°C or °F), and measure or simulate the millivolt. But is could not use to measurement or source at a same time.

Special Features :
• Maximum voltage applied between any jac and earth ground or between any two jack : 30V
• Sources and measures 7 thermocouple type
  devices (J, K, T, E, R, S, B, N) or mV (-10mV ~ 100mV)
• Large 5 digit LCD with full angel
• High accuracy maximum up to 0.3°C and 0.025% for mV
• With standard jack for external power supply

The new KUSAM-MECO Volt & milliampere Calibrator Model KM-CAL-804 is a high accuracy (0.05%) Calibrator. It has 5 digit LCD display with high stability. It can be used for calibrating Transmitters, Thermocouples, SCADA systems, Transducers. It also provides loop circuit power 24V. The max. load is 1kW at 20mA range when the power is higher than 6.8V; The max. load is 700W at 20mA range when the power is within 5.8V - 6.8V. Temperature Coefficient ± 0.005%, range / °C (5°C -18°C, 28°C - 40°C). It works on 9Volt alkaline battery and battery life is approx 20 hours under the condition of 10mA.

General Specifications :
• Basic Accuracy : ± 0.05%
• Display : 5 Digit LCD display.
• Max. Allowable Voltage : 30V..
• Operating Temperature Range : 0 ~ 50°C.
• Humidity range : ≤ 80% RH
• Storage Temperature Range : ≤ -10°C ~ 55°C
• Humidity range : ≤ 90% RH
• Temperature Coefficient : 0.1 x (dedicated Accuracy) % /
  °C (5°C ~ 18°C, 28°C ~ 40°C)
• Power : 1.5V x 2 alkaline batteries.
• Power Consumption : about 400mA / 3V in condition of 1kΩ load & 20mA output.
• Dimension : 180 (L) x 90 (W) x 47 (D) mm (with protector)
• Weight : About 500g

• Delivery Time: Ready Stock, subject to prior sales